Press E-Cast is a wax-filled photopolymer material for the production of full anatomical crowns and bridges with extreme dimensional accuracy in X, Y and Z, as well as exceptional surface finish. Can also be used to print partial frameworks.

The burnout for parts 3D printed in Press-E-Cast is rapid, clean and ash-free, resulting in accurate, quality castings. With a moderate wax content, Press-E-Cast also delivers low thermal expansion during burnout.

Parts 3D printed in Press-E-Cast can be pressed into full contour ceramics.

Physical properties:-

• Tensile Strength: 56 MPa
• Elongation at Break: 3.5%
• Flexural Strength: 115 MPa
• Flexural Modulus: 3350 MPa
• HDT (Heat Deflection Temperature) No heat treatment necessary: 140° C (284°F)